Witsee
Witsee QuickFit Bowling Sensor Kit
Witsee QuickFit Bowling Sensor Kit
✓ Free shipping (lower 48) · ✓ Free in-store pickup
Not on the shelf near you? Order online and pick up at any Virtue location, usually in 2–4 days.
Store availability
Couldn't load pickup availability
See what you feel. The Witsee QuickFit Sensor is a 2.1-gram, in-ball bowling sensor that pairs with the Witsee app (iPhone & Android) and measures every shot in real time: rev rate (RPM), release speed, axis tilt, axis rotation, loft, loft angle, swing height and PAP. Every throw is replayed in 3D so you and your coach can see exactly what the ball did.
Why bowlers and coaches use Witsee
Any ball, any center: no lane camera or house system required.
No extra drilling: the sensor threads into a QuickFit mount that sits in one of your existing finger grips.
Move it between balls in seconds: put a QuickFit mount (sold separately, $4.99) in each ball and just swap the sensor.
Accurate: tested against a bowling robot.
Free app, no subscription required: unlimited throws and all parameters on the free plan. Optional Premium ($89.99/yr or $9.99/mo, billed by Witsee) adds the full 3D environment, unlimited saved sessions, multiple sensors per session and CSV export.
Long battery life: one CR1025 coin cell lasts 1,000+ throws (manufacturer estimate).
What's in the box
Witsee QuickFit sensor (17 mm wide x 10.7 mm tall)
Custom Witsee screwdriver
3 QuickFit mounts: Small (blue), Medium (black), Large (orange)
CR1025 battery (pre-installed)
The XS (grey) mount is not included and is sold separately.
Need spares? Extra QuickFit mounts ($4.99 each), replacement screwdrivers, CR1025 batteries and in-store installation are all in our Witsee Sensor & Parts collection.
Which mount fits my grip?
Mount |
Vise insert size |
Turbo |
JoPo |
|---|---|---|---|
Small (Blue) |
3.5 to 5 (43/64" to 23/32"), likely fits 5.5 |
4 to 5 |
11/16" to 23/32" |
Medium (Black) |
6 to 7 (3/4" to 25/32"), likely fits 7.5 |
5.5 to 7 |
47/64" to 51/64" |
Large (Orange) |
8.5 to 9 (53/64" to 27/32"), likely fits 10; 11 with glue |
7.5 to 10; 11 with glue |
51/64" to 57/64"; 29/32" with glue |
XSmall (Grey) |
Glue-in mount for any grip from size 3 to 11 when there is space under the grip |
||
Actual fit can vary with hand size, grip style and insert type. Not sure? Any Virtue technician can size it for you.
How to install (about 5 minutes, no drilling)
Wake the sensor: pull the plastic tab out of the battery. The status light blinks for about 5 seconds.
Pair it in the Witsee app: create or sign in to your account, allow Bluetooth, tap New sensor and hold the sensor near your phone (up to 30 seconds). Pair only inside the app, not in your phone's Bluetooth settings.
-
Check your finger grip: clean and dry the finger hole you will use.
If the grip sits at the bottom of the hole, use the friction fit: press the mount that matches your grip size in evenly. It should not spin or lift under normal hand pressure.
If there is space under the grip (grip cut short or hole drilled deeper), use the smallest mount with super glue: a minimal amount of cyanoacrylate on the mount base, keep the threads clean and let it fully cure.
Thread in the sensor: use the T-end of the screwdriver and turn until snug. Do not overtighten. Check that nothing moves, rattles or sticks up into the grip where your finger goes.
Assign the ball: add your ball in the app's Ball Library and assign it to the sensor.
Bowl: wait for Ready to throw, hold the ball still for one second to calibrate, then make your normal delivery.
Removing it: unscrew the sensor with the T-end. To pull a mount, screw the threaded end of the screwdriver into it and pull straight out (friction fit) or keep turning until it pops free (glued). Your grip stays in the ball.
Battery: when the app shows low battery, open the lid with the screwdriver's small blade and drop in a new CR1025 3V cell.
Want us to install it?
Add Professional Installation ($10) when you order and bring your ball to any Virtue Bowling Supply location. A Virtue technician will size the mount, fit or glue it, install the sensor and confirm it pairs with your phone. No finger grips in your ball? We can install grips too (priced separately).
Witsee is a training tool. Check with your league or tournament director before using it in sanctioned competition.
